Reliable coriolis flow meters factory: What is a Mass Flow Meter? A mass flow meter, also known as a mass flow sensor, mass flow meter working principle is measures the flow rate of a fluid based on its mass. The flow rate is determined by the difference between the mass of the fluid entering the meter and the mass of the fluid leaving it. This difference is then taken into account. Due to their direct mass flow measurement, high accuracy, and ability to measure fluids with varying properties, coriolis flow meters are commonly used in this industry. Flow meters with magnetic components can also be used to measure corrosion-resistant fluids, but they are restricted to conductive fluids, and petrochemical products are not conductive. Find extra information on coriolis flow meter.
Is the scope of application of turbine flow meter very wide? Suitable for more industries: This product is suitable for power generation, petrochemical, metallurgy and coal mining industries. Can measure more media: Because it can measure oil, organic liquid, inorganic liquid, liquefied gas, natural gas, coal gas and other media, the sales volume of the product will also be higher. The quality of professional manufacturers is more guaranteed: At present, only manufacturers with advanced technology and strong strength can produce products with more reliable quality. Measurement of some corrosive liquids, such as sulfuric acid, hydrochloric acid, nitric acid, acetic acid and other acids and various chemical solutions.
After-sales service of gas turbine flowmeter: The use effect of gas turbine flowmeter largely depends on whether it is used reasonably. For new users, it is the supplier’s responsibility to provide technical guidance before the user installs. As for the products of international brands, they have occupied the market of major Chinese users for many years, and these major users have sufficient technical strength. For their scattered users, they basically rely on middlemen to do it. Problems brought about by after-sales service appear.
Turbine Flow Meter has the characteristics of high accuracy, good repeatability, convenient installation and maintenance, and simple structure. Liquid flows through the turbine casing, causing the internal rotor to rotate. When the rotor rotates, an electrical signal is generated in the pickup coil. This signal is converted to engineering units (liters, cubic meters, gallons, etc.) on the applicable local display. Optional accessory modules can be used to export signals to other devices. Make sure the vortex flow meter model meets your specific needs. For your future reference, if this information becomes unreadable on the turbine, it may be useful to record it on the nameplate of the manual. See the nameplate for your custom product specifications. Read even more info on https://www.bjssae.com/.
Beijing Sincerity has developed over years to manufacture the Coriolis Mass Flow Meters industries. Through continuous research, development and transformation, we have become the leader of the Coriolis Mass Flow Meters industries in China. The Coriolis measuring principle is used in a wide range of different branches of industry, such as the life sciences, chemicals, petrochemicals, oil and gas, food, and – no less importantly – in custody transfer applications. Coriolis flowmeters can measure virtually all fluids: cleaning agents, solvents, fuels, crude oil, vegetable oils, animal fats, latex, silicon oils, alcohol, fruit solutions, toothpaste, vinegar, ketchup, mayonnaise, gases or liquefied gases.
When the vortex gas flow meter is installed behind the pressure reducing valve, the saturated steam suddenly decompresses greatly, the fluid expands adiabatically, the water droplets partially evaporate, and at the same time absorbs the heat of vaporization from the liquid and vapor phases, reducing the temperature of the vapor and liquid phases. If the temperature is not lowered much or the humidity is higher before evaporation, the temperature will quickly drop to the saturation temperature corresponding to the new pressure, and a new equilibrium will be established. At this time, the steam is still saturated steam. If the pressure drops a lot or the humidity before evaporation If the temperature is lower, the temperature is still higher than the saturation temperature corresponding to the new pressure due to the evaporation of water droplets, and the steam becomes superheated steam.
The Insertion Density Meters are equiped with the microprocessors inside, so the sensor could complete the signal conditioning, calculation and diagnosis functions, and it does not need the remote eletronic devices for processing. Typical industries applied include the petrochemical industiry, electricity power industry, wine industry, food industry, pharmaceutical industry, and mineral processing (such as, clay, carbonate, silicate, etc. ) For sepecific applications, the Insertion Density Meters are largely used in the interface detection of the multi-product production lines, density detection of the mixed liquid, end monitoring of the reaction kettle, and the separator interface detection.
Bobby Marino
Ursula Manner